firmware update

Canon 2.0.3 Firmware Update for Canon 5D Mark II is Replaced by 2.0.4

by Dave Warner on March 19, 2010

The release that Canon just did the other day has been pulled and replaced. Here’s the story:

We apologize sincerely for the inconvenience caused to our customers by suspending the availability of the Version 2.0.3 firmware.

We are now introducing the Version 2.0.4 firmware. This firmware corrects the malfunction that occurred in the previous Version 2.0.3 firmware, in which the manual recording level changed and made recording impossible.

Customers who have the Version 2.0.3 firmware on their cameras should update the firmware to Version 2.0.4.
EOS 5D Mark II Firmware Update Version 2.0.4
Firmware changes

In the Version 2.0.4 firmware, the following phenomena that occurred with the Version 2.0.3 firmware (which was to enhance the movie functions) have been corrected.

* There was a phenomenon in which the manual recording settings made in C1/C2/C3 were changed and sound could not be recorded if manual sound recording was used in the C1/C2/C3 settings and the camera was subsequently turned off (or if Auto Power Off was activated). This does not occur in modes other than C1/C2/C3.

The Version 2.0.4 firmware includes the movie function enhancements listed in items 1 through 5 below, and also incorporates the correction listed in item 6.

1. Adds or changes the following movie frame rates.

NTSC:
* 1920×1080 : 30 fps (changed – actual 29.97 fps)
* 1920×1080 : 24 fps (added – actual 23.976 fps)
* 640×480 : 30 fps (changed – actual 29.97 fps)
PAL:
* 1920×1080 : 25 fps (added – actual 25.0 fps)
* 1920×1080 : 24 fps (added – actual 23.976 fps)
* 640×480 : 25 fps (added – actual 25.0 fps)

2. Adds a function for manually adjusting the sound recording level (64 levels).
3. Adds a histogram display (brightness or RGB) for shooting movies in manual exposure.
4. Adds shutter-priority AE mode (Tv) and aperture-priority AE (Av) mode to the exposure modes for shooting movies.
5. Changes the audio sampling frequency from 44.1 KHz to 48 KHz.
6. Fixes a phenomenon where communication between the camera and the attached lens is sometimes interrupted after manual sensor cleaning. (This phenomenon only affects units with Firmware Version 1.2.4.)

Caution:

* Firmware Version 2.0.4 is for cameras with firmware up to version 2.0.3. If the camera’s firmware is already version 2.0.4, it is not necessary to update the firmware.
* Movies captured using EOS 5D Mark II cameras with Firmware Version 1.1.0 to 1.2.4 can be played back on cameras updated with Firmware Version 2.0.4. However, if you try to play back movies captured with a camera with the new firmare on a camera with a previous firmare version, a message, Cannot play back image, appears on the camera’s LCD monitor.
* It is recommended that you use the latest Canon applications*1 to edit movies captured with EOS 5D Mark II cameras that have the latest firmare because some previous versions do not support movie-editing functions and the frame rates that are added or changed by the latest firmware. You can download the latest Canon applications from our Web site.
*1 ZoomBrowser EX Version 6.5.0 or later (compatible operating systems : Windows XP/Vista/7)
ImageBrowser Version 6.5.0 or later (compatible operating systems : Mac OS X v10.4/10.5/10.6)
* In addition to the enhancements to the movie function, the accompanying instruction manual has also been revised. Users are asked to download both the latest firmware and the latest instruction manual. You can proceed to download the instruction manual by clicking the [I Agree] button from the bottom of this page.

Fore more information and to download the link, click here.

{ 0 comments }

New Canon 5D Mark II Software Update – Details SLOWLY Coming Out!

by Dave Warner on March 2, 2010

Well, we’ve all been waiting for it, right? The new firmware for the Canon 5D Mark II SEEMS like it is coming out any time now. There is a press release out from Canon London that talks about it, and Canon Europe has some videos showing the capabilities that have been added into the software. The Canon Rumors guy says it will be out March 16th. CNET seems to think that this announcement came out early because of WPPI. Either way, here’s the press release that is out of London:

Canon adds 24 and 25fps HD Movie recording to the EOS 5D Mark II with Firmware 2.0.3

London, 2nd March 2010 – Canon today pre-announces the release of a firmware update for the multiple award-winning EOS 5D Mark II. Originally announced in late 2009, the update adds 24* and 25 frames per second (fps) recording to the camera’s EOS MOVIE video function, and will be available as a free download from the middle of March.

Developed following feedback from photographers and cinematographers, Firmware 2.0.3 further enhances the EOS 5D Mark II’s excellent video performance. The addition of new frame rates expands the camera’s video potential, providing filmmakers with the ability to shoot 1080p Full HD footage at 24fps (actual 23.976fps) – the optimum frame rate for cinematic video. 25fps support at both 1920×1080 and 640×480 resolutions will allow users to film at the frame rate required for the PAL broadcast standard, while the new firmware will also change the 30fps option to the NTSC video standard of 29.97fps.

A new histogram display for shooting movies in manual exposure, shutter-priority (Tv) and aperture-priority (Av) have been added, and exposure modes will also be available in movie mode. Improved audio functionality will allow users to set sound record levels manually using a sound-level meter displayed on the LCD screen. The audio sampling frequency has also been increased from 44.1KHz to 48KHz, providing the optimum audio signal typically required for professional or broadcast material.

With its full frame CMOS sensor and compatibility with Canon’s wide range of premium lenses, the EOS 5D Mark II is already recognized for its outstanding HD video performance. Launched in September 2008, the camera immediately created a wide range of new possibilities for photographers and videographers, and the addition of new frame rates and manual audio levels extends those possibilities even further – allowing movie makers to shoot stunning movies to suit practically any creative purpose.

Extreme sports photographer Richard Walch was one of the first to be given the chance to use the newly updated EOS 5D Mark II to shoot the snowboarding movie “I Love My Friends”. Commenting on the EOS 5D Mark II’s video performance, Richard said: “The addition of the new frame rates opens up a whole new range of possibilities. If you’re a cinematographer, independent film maker or just enthusiastic about making your own movies, get out there and give it a try”. If you like to view his test videos, click here.

When the software is available, this will be the spot to get it: http://www.canon.com/eos-d/

{ 0 comments }

PocketWizard Releases Version 5.0 Firmware for MiniTT1™ and FlexTT5™

by Dave Warner on December 30, 2009

Elmsford NY – December 29, 2009 – PocketWizard launched the newest and most advanced firmware for the MiniTT1 Transmitter and FlexTT5 Transceiver. ControlTL™ Firmware Version 5.0 for Canon incorporates several new features, many performance improvements and new camera and flash compatibility. Now, with a simple download, customers who already own MiniTT1’s and FlexTT5’s can upgrade them to get the same features found on brand new units. Owners are encouraged to upgrade all existing units at the same time for improved performance.

Two key version 5.0 capabilities are Rear Curtain Sync and Pre-Flash Boost. PocketWizard’s rear curtain sync allows the photographer to set the shutter speed at which rear curtain sync automatically engages while optimizing the timing of rear curtain sync to fire at the absolute end of the shutter opening. Pre-Flash Boost provides enhanced E-TTL performance when using flash diffusers, doing bounce flash, or at ranges just beyond the normal E-TTL capabilities. By increasing the pre-flash power, PocketWizard has offset the loss of light in these challenging E-TTL situations.

Another significant new feature is Automatic Camera Detection. The ControlTL system can now automatically detect exactly which camera is being used to optimize system performance precisely for that camera. For Canon 5D and 5D Mark II users, this means the system will set the High Speed Sync crossover point to 1/320th versus the default of 1/400th to compensate for those camera’s slower shutter mechanisms. Camera compatibility for the Canon 7D has been added as well as E-TTL flash compatibility for the Metz 58 AF-1 flash.

Several other new features and refinements have been made and complete details can be found at www.PocketWizard.com/downloads. Current MiniTT1 Transmitter and FlexTT5 Transceiver owners can upgrade to the new firmware for free via the recently revised PocketWizard Utility.

About PocketWizard and the MiniTTI and FlexTT5

The PocketWizard MiniTT1 Transmitter and FlexTT5 Transceiver for Canon allow photographers to wirelessly control single or multiple off-camera flash units. These radios interpret the flash and exposure data communicated through the camera’s hot shoe and digitally transmit the information through a reliable radio signal. Photographers can place E-TTL flashes connected to a dedicated FlexTT5 Transceiver for wireless E-TTL operation wherever they need to illuminate a scene, even out of sight or in bright sun. Any change in ISO, aperture, shutter speed and even flash compensation is automatically communicated and adjusted wirelessly. A ControlTL system for Nikon is in the works as well as compatibility with some studio lights. The ControlTL system is also compatible for standard triggering with all PocketWizard radios.

For More Information

For more information on firmware version 5.0, including all new features and refinements, please visit PocketWizard.com.

{ 0 comments }

Canon EOS 7D Firmware Update 1.1.0

by Dave Warner on November 5, 2009

Canon has released a firmware update for the EOS 7D. Here is what it does:

Corrects a phenomenon that in images captured by continuous shooting, and under certain conditions, barely noticeable traces of the immediately preceding frame may be visible.

This phenomenon is not noticeable in an image with optimal exposure. The phenomenon may become more noticeable if a retouching process such as level compensation is applied to emphasize the image.

To download the update, click on this link.

{ 0 comments }